How to check your port if your device doesn’t connect to your computer
In 2022 we started a new system, that checks automatically all ports, so if your device doesn’t connect to the laptop, the best is to restart your laptop. As long as you use PULSAR, it should automatically detect what port is being used.
Devices built prior to 2022 follow the following instructions:
Sometimes, after a windows update, the ports of the computer are reset, and the computer forgets what was plugged in where and what port was used for certain connections.
How to check this? You can open Device Manager to check.
You can open Device manager in many ways, but considering the many languages Windows uses, for me best way is always the following:
Click once on you windows button on your keyboard, it has to be beside the Ctrl button on the bottom left of the keyboard.
Type or copy in there the following: devmgmt.msc
This will open your Device manager:
You will have a line if you have your device connected: Ports (COM & LPT)
Expand that line with the arrow beside it.
There should be an “USB Serial Device” listed with the communications port (COM3) or any other number but not (COM4). This means that the computer recognizes your device, but assigned it to the wrong port. In our case Port3
Double click the line, and the port properties should show up:
Go to “Port Settings”
Click on the “Advanced” button
Uncheck the FIFO buffer check-box.
Here, at the bottom you will see COM Port Number
Choose from the dropdown options COM4 instead of COM3 or whatever number comes after the letters COM. Click OK, OK, and close device manager.
This should take care of your connection issues.
Restart your Computer and the ED.X and NUCLEUS should connect automatically
It is advisable to dedicate a laptop to the program. However, if this is not possible then it is highly recommended that no other programs of medical nature be installed as conflicts have been reported in the past. It is advisable to only install the recommended software and to follow the ‘Computer preparation’ instructions.
- It is recommended to have an Intel Core CPU (Core i7 duo) with a speed over 2 GHz. Try to avoid Celeron, because of the less ‘cache’ factor.
- The program itself requires about 8 GB of hard drive space for installation. Always maintain at least 20 GB free in the hard drive so that regular maintenance can be carried out. 8 GB of RAM is the minimum recommended but more is better.
- Our devices have a USB3 port. You may be connected directly using a USB3 cable. To install the USB3 Cable, please see the page “USB – to – USB Cable Installation Instructions.”
- Monitor TFT/XGA****: Pixel size must be set at 1280×1024 or higher for optimum viewing of the ‘PULSAR v2.0’.
- Video and Sound cards are required with a minimum 128 MB of memory available.
- The Operating system needed is ‘Windows 10’, or 11, any version is recommended.
The difference between the different CPUs (Central Processor Unit) is the speed, and the cache (The memory built into the processor itself). An AMD* CPU normally will perform faster than an Intel** CPU at the same speed. The Celeron*** CPU normally has less cache.
The PULSAR software will first look for the space it needs to perform in the cache memory, this is extremely fast. If it does not find enough space it will go to memory built into the memory on the motherboard, slower but still fast (This is the RAM). If it still does not find the space where it has to go to the hard drive (Slow) and execute the instructions. This however will only happen with the ‘PULSAR v2.0’ software at very low RAM (e.g. 512 Mb). Thus the program may run slowly. However, this is NOT recommended at all.
The ‘PULSAR v2.0’ software is a large application program running in real-time. The Operating System ‘Windows’ does not run in real-time. The ‘PULSAR v2.0’ software sends a signal to the box then the box starts to generate the appropriate frequencies and then this is shown on the LCD screen. The devices include their own processor to be able to do this, thus the CPU of the computer is free.
The computer needs a high resource capacity, because the ‘PULSAR v2.0’ Software Database (the core of the program), uses a lot of power. Another aspect is the image-generated animations; these require a lot of resources. The specifications focus on the RAM but ‘Cache’ must be taken into consideration.
It is a revolutionary computerized biofeedback system that is highly sensitive.
It is capable of calculating over 65.000.000 bits of bio-energetic data from the client to help detect stressors in the body within 3 minutes.
There are over 3500 energetic modalities offered by the NUCLEUS & ED.X (formerly ED.X and NUCLEUS) Quantum Biofeedback System. This system gives you very fast insight into what is causing you distress.
That is why it is nicknamed the “Quick-See”, because of its ability to very quickly see what is affecting you within your body and your environment. It measures the bio-energetic balance and overall stress reactions of the body making it the best energetic biological analysis possible.
Excess stress is one of the pathways to disease and the NUCLEUS & ED.X QUANTUM BIOFEEDBACK harmonizes and reduces the stressors that can create disease.
It can scan everything from vitamin levels, amino acids, nutrients, pH, cellular age, metabolic age, nutrients, food substances, minerals, fatty acids, enzymes, toxins, viruses, deficiencies, weaknesses, food sensitivities, hormones, fungus, muscle tone, worms, bacteria, disease, balance of internal organs, emotions (emotional chart), neurotransmitters, psychological factors, frequency, amperage, voltage, inductance, capacitance, oxygenation, hydration and much more. The list is endless.
The information provided by the NUCLEUS & ED.X (formerly EDUCTOR1) device is fundamentally different from x-rays, blood tests, etc because it tells us about the energetic state of one’s body and the direction in which the body focuses its energy to balance and harmonize itself.
In simple words, it will tell you what your body wants and needs – nutritionally, mentally and emotionally.
Building on the work of earlier pioneers in the field, it has taken the whole concept to new levels. Firstly, this is not a point-probe device. It works independently of the practitioner, whose job is to interpret the results for you.
In addition, the device uses multiple contact points, which greatly enhances the range of modalities it can measure, harmonize and balance.
Not only is its database constantly growing as more conditions are measured and added, but it also checks for energetic disturbances in – for example, your spine, your acupuncture meridians, your organs, and so on. It also measures the degree to that emotions continue to cause you problems. In addition, it can suggest other treatments that might be suitable such as herbs, nutrition, homeopathy, counseling, etc…
In short, the NUCLEUS & ED.X is undeniably more advanced than any other device of its kind. For those who like more technical information, the accuracy of the Quantum is Bio-resonance system lies on over 25 years of research conducted in the field of bio-energetic and bio-response medicine. The body has shown us that is indeed electric; therefore electrical reactivity in the body can be measured via response to impedance, amperage voltage, capacitance, and frequencies. The device measures 16 standard electrical parameters of the body beyond just simple resistance. This makes the NUCLEUS & ED.X unique as standard point and probe devices that only measure resistance.
Tri-vector resonant frequencies (a mathematical calculation of the relationship between voltage, amperage, and resistance) of substances are compared to the tri-vector frequencies of the client. This results in the best bio-energetic integrative analysis possible
Biofeedback, quite simply, is any technique which takes a measurement of the body, and provides a result.
A scale can be said to be a biofeedback device that measures weight; a thermometer is one that measures body temperature. We can measure factors of the body electric such as the voltage from the firing brain cells, the amperage of heart muscle contractions, the voltage of the muscles and the resistance in the flow of electricity of the skin. We can measure the oscillations of these factors as seen by the EEG, ECG, EMG and GSR. The same technological theories that brought us biofeedback in the 1960’s, have also brought devices like the CAT Scan, the MRI, TENS, ultra-sound, and many other sophisticated technologies used in our health care systems.
The information measured with a biofeedback device is then “fed-back” to the client, informing them of various physiological parameters and stress responses within the body. This educates them about the need to retrain their body’s stress responses and balance the body electric, make lifestyle changes or leam to control physiological reactions, in order to achieve improved relaxation and better health overall.
Frequency Waveforms And Vibrations
Concerning matter, we have been all wrong. What we have called matter is energy, whose vibration has been so lowered as to be perceptible to the senses. There is no matter.”
– Albert Einstein
High school chemistry teaches that every unique substance on the planet has its own unique molecular structure. In physics class, we learn that each of these has a unique frequency at which it ‘vibrates’. It is possible to identify the frequency of a specific item by flipping through the possible frequencies until resonance is found. Resonance occurs when two similar frequencies are overlaid creating a ‘stronger’ wave by increasing the amplitude (height) of the wave, while maintaining the same frequency/vibration or Voltammetric patterns. The frequencies of many items, ranging from viruses, bacteria, cell type, etc. have been consistently measured over the last several decades creating a library of reliable “Voltammetric signatures”.
The NUCLEUS & ED.X devices first identify which of these frequencies is present within the body, by looking for those that produce a measurable resonance response. It then feeds back to the body those frequencies necessary to restore balance. Through this process of entrainment, there is an overlapping of the ‘out of balance’ frequencies with the desired frequency until the dominant frequency is that of the desired healthy state frequency. This process is re-education, applicable to muscles and subtler levels using the devices as well.
The potential uses of Quantum Biofeedback in assessing and addressing the body’s subtle physiological parameters are paramount in Richard Gerber’s book, Vibrational Medicine, as he describes: “Vibrational medicine is a diagnostic and healing approach to illness using energy in various forms and frequencies. As a therapy, vibrational medicine is the application of different types of energy for healing, including approaches as traditional as X-ray and radiation therapy for cancer, the use of electrical nerve stimulation for treating pain, and electromagnetic field stimulators for accelerating the healing of fractured bones. Even full spectrum light is used for treating seasonal affective disorders or the ‘winter blues. However, vibrational medicine also covers the more subtle forms of treatment such as acupuncture, homeopathy, flower essences, therapeutic touch, and that sort of genre. The latter involve using subtle life-force medicine, but they are energetic therapies nonetheless.
This is the spectrum from the more traditional to a range of therapies that stress treatment. the whole person is sometimes referred to as ‘complementary’ medicine. I think the electroacupuncture system goes way beyond what we can pick up with conventional blood tests. The acupuncture meridian system appears to be the interface between the physical body and the higher energy control systems. So you can not only pick up a disturbance that’s at the physical level, you can actually pick it up at the subtle Energetic level before it is as illness.”
Biofeedback utilizes electro-dermal sensors to measure Galvanic Skin Resistance (GSR), also referred to as Electro-Dermal Response (EDR). GSR measures mild electrical impulses on the surface of our skin, which change due to moisture. The moisture of the skin changes according to the body’s degree of stress and/or relaxation. There is a direct relationship between sympathetic nervous activity and emotional arousal. GSR is so sensitive it can even measure fluctuations in emotional states. Biofeedback instruments measure muscle activity, skin temperature, electro-dermal activity (sweat gland activity), respiration, heart rate, heart rate variability, blood pressure, brain electrical activity, and blood flow. There are many types of biofeedback: GSR, EEG, CAT scan, MRI, etc. These technologies are able to capture the bodies’ analog electrical signals and translate those signals into meaningful information through complex algorithmic software that a technician can then decipher.
Research shows that biofeedback, alone and in combination with other behavioral therapies, is effective for treating a variety of medical and psychological disorders. Biofeedback is currently used by physicians, nurses, psychologists, counselors, physical therapists, occupational therapists as well as a host of other professionals and laypeople alike.
In fact, in 1987, it was found that Biofeedback is effective in reducing physician visits, medication usage, duration, and frequency of hospital stays, as well as reducing mortality and enhancing the quality of life.
FACT: Studies by Jonas and Levin show Biofeedback as an ideal intervention for the majority of patients who are now increasingly demanding:
- Gentler, less toxic, and less invasive first-line interventions
- More integrative and alternative therapeutic options
- More information and choice in making the best possible decisions for their care
- More participation and involvement in their treatment
The easiest way to really understand what Quantum Biofeedback can do is to think in terms of stresses or stressors – all those things we are born with or happen to us or that get into the body from the environment that may cause disease.
Quantum Biofeedback is totally non-invasive. A quick three – minute test is performed energetically and the results are fed into the computer software. This provides the Practionner with information about the state of the energy and the stress(es) most prevalent in the body at that time.
After gathering test results, the data offers an understanding of your potential needs. It can reveal the specific stressors, which could be the underlying issues surrounding your body’s ability to heal. It is then that Quantum Biofeedback can be applied in order to help you correct and reduce the stressors energetically.
Resonates: During scanning, the NUCLEUS & ED.X device resonates with thousands of energetic signatures for one-thousandth of a second each, and records the degree to which the body reacts. This type of rapid testing is known as the Xrroid process and is the most advanced and precise of its technology.
Measures: The NUCLEUS & ED.X measures voltage and current potential as well as skin resistance. To measure transcutaneous skin resistance, we apply a medically safe variant micro-current to the body. The changes in voltage, amperage, and resistance give us reactivity profiles that determine the Xrroid.
Compares: The NUCLEUS & ED.X compares the tri-vector resonant frequencies – a complex mathematical calculation relating to voltage, amperage and resistance – of the body with over 13.000 energetic signatures of compounds stored in our database.
Feeds Back: The NUCLEUS & ED.X feeds back to the client-directed Xrroid auto-focusing GSR (Galvanic Skin Resistance) signal.
This allows a variant micro-current EDS challenge for measuring electro-potential and GSR relaxation for stress and pain management to be easily applied.
110 Bits of information per Millisecond;
Accuracy: + or – 0.001 Volts, or -1 mA and or -10 Ohms
Device Power Output : Max 250mA at 6V DC;
Device Ports : 2 Serial, 1 USB, 3 Auxiliary;
Biofeedback has been scientifically proven to help reduce stress and hyper-reactivity that may be related to illness, injury or emotional trauma.
Quantum Biofeedback can result in an overall improved sense of well-being, greater mental clarity, pain reduction, and improved physical performance.
During a session, the client wears wrist and ankle bracelets and a head harness.
The sensors/electrodes comfortably read electrical impulses from the body and send the information to the computer software, which acts as a monitoring device. The Quantum Biofeedback practitioner is able to educate the client about the specific areas of the body/mind that are in need of stress reduction and re-education based on the information translated between the biofeedback device and software to the computer screen. • These data findings allow the client to better understand their reactions to stress and learn how to better control their physiological responses.
While the Quantum Biofeedback process is completely non-invasive and gentle, this powerful stress management support system allows relaxation and increases the body’s ability to heal itself as it is designed to do. The process of Quantum Biofeedback helps the body remember the balanced and stress-free state. When entrained to the healthier patterns of a relaxed state, this process of self-regeneration often happens naturally.
The NUCLEUS & ED.X scans the client’s body like a virus scan on a computer, looking for everything from:
- Viruses and bacteria
- Nutritional deficiencies
- Food Sensitivities
- Hormone levels
- Fungi and Parasites
- Color Therapy
- Chakra balancing
- Environmental factors
- Acupuncture meridians
- Spinal Flow
- Digestion analysis
- Biorhythms Neurotransmitter and emotional frequencies
- Weight Loss
- Bach flower remedies
- Stem cells
- Nutrition panels
- Sports panels
- Blood panels
- Spinal panels
- Brain wave stimulation
- Trauma therapy
Entrainment is a well-studied phenomenon within physics, by which two separate systems, operating at varying frequencies, will settle into a common frequency when situated within one another’s field of influence. It may take the body multiple sessions to entrain or “relearn” healthier patterns. Some people respond very quickly, especially those whose lifestyle choices are already aligned with good health.
Others may need more education, training, and support around improving nutrition, exercise, sleep patterns, and/or avoiding addictive substances, etc. Generally speaking, the longer a client has held certain stress patterns which are causing them pain or illness, the more sessions they may need to begin re-balancing or re-training those patterns and reactions.
Generally, we recommend clients make a commitment to their health by investing in multiple sessions in order to truly see and feel the results. For example, successful smoking cessation programs administered in hospitals and private clinics require about six to eight sessions.